Diy Pallet Wine Rack
The slight upward curvature along the bottom of the pallet is an important part of the aesthetic of.
Diy pallet wine rack. Gather your pallet wood for the wine rack portion of this diy you re going to need 5 full wooden pallet boards and 1 and 1 2 wooden pallet rails. 4 diy old pallet wine rack wine and dine with friends and family and have your wine ready in this pallet wine rack. The rails are the curved pieces that sit below the pallet and hold the boards together. The process of the construction of a diy pallet wine rack is not so difficult.
Use a circular saw or hand saw and cut in the indention of the pallet where fork lift forks. Add your two spacers to the bottom of your piece like seen below the spacers are 3 inches wide and provide space to slide in the bottom of the wine glasses. This pallet wine rack may look old but actually it was either stained or torched to make it look like it is an antique piece. Cut pallet to size.
The rack can accommodate a number of wine bottles and several wine glasses as well. At each mark we took a 3 8 inch drill bit to create a rounded slot back. Pallet wine rack step 1. How to make a wine rack from a wood pallet materials needed.
Begin by cutting the pallet in the middle of the lateral slit on both sides in two parts. We measured to be able to fit 6 wine glasses in the rack.