Diy Stocking Holder Post

The shimmering candy cane stripes rally add a touch of magic to the look.

Diy stocking holder post. I did 3 nails on each board. Lay your posts either on the ground or on horses evenly spaced. 22 32 x 2 x 2 piece of plywood cut down to 16 x 16 4 x 4 x 4 1 2 deck post cut to 41 to fit the post cap correctly it needs to be a nominal 4 x 4 4 x 4 pyramid wood post cap 4 x 4 wood post skirt 10 x 21 2 phillips flat head wood screws 10 x 1 phillips flat head wood screws. Paint all sides of each post and your 3 back pieces and let dry.

Use it to hold cookies and milk for santa like i did or add hooks to hang stockings. For the next two stocking holders make sure to only use empty stockings unless you attach the holders to your mantel somehow. Protect and maintain your property with our wide selection of fencing materials from b q. Add weight to the bottom of the box so it can hold all the stockings without tipping.

But for now this stocking post fits perfectly next to our skinny living room tree. Mine are 1 1 4 in apart lay one of the 1 2 boards along the bottom and either hammer in a couple nails or shoot. Measure 3 1 2 from one end of the 4 4 post and drill a hole all the way through using the 1 2 spade bit staying as vertical as possible. And now i m thinking after the holidays i might just move this post up to my son s bedroom to hang all his hoodies and zips.

Slide wooden dowel in the hole and make sure it is level when the post is upright. Measure and mark the center point on the 16 x16 plywood base on both sides. We have a huge range of fence clips bolts brackets and connectors to make installing fences and gates simpler than ever. Sturdy steel supports help reinforce fencing to withstand everything from falling.

Build a diy stocking post build basic this free standing post is a perfect holiday decoration to place next to the tree or fireplace.